Current Position:首页 > Technology

How to choose and use the press

TIME:2015-05-29 10:44:17FROM: AUTHOR:
How to choose and use the press:
1.First press about what to buy: buy a press machine when the first look at the appearance of the paint is uniform, whether the
       

How to choose and use the press:
1.First press about what to buy: buy a press machine when the first look at the appearance of the paint is uniform, whether the individual parts are missing check the machine, and then turn the large pulley, it will turn more than a few times to check squeezed inside the chamber if there is iron and other foreign matter that might have been stuck phenomenon, but also need to pay attention to the gear box gear is normal. A good press enables the user to save a lot of trouble in the oil processing. Selected press models can squeeze corn, peanuts, soybeans, cottonseed, rapeseed, tea and other granular oil.
2.how to press the correct installation: Before installation, respond to the new machine purchased thorough cleaning. Lifted the squeeze cage, out of the spindle, the inner and outer surfaces with emery cloth pressing screw and screw feeder and wipe clean. All lubrication filling lubricant in the gearbox oil added, the grade and varieties shall comply with the requirements of the machine manual. Wipe clean round after row, ready installed. When installed according to the original arrangement of positions must not be misplaced, because the circular row of the arrangement position and order of the crushing performance great relationship. After the round row compression nut installed with pressed disc when pressed to extract oil level flexibility peristaltic appropriate. After the above press treatment, it can be fixed with anchor bolts on the foundation. During installation, the motor pulley and press the pulley should align moderate position, the rotational direction is correct, the tightness of the belt should be adjusted appropriately.
3.Press use: Before using the press, first of all should be ready aids and containers, check and adjust the belt tightness. Then start the motor, the machine idling for about 15 minutes, check the speed of pressing screw shaft. Usually the speed should be around 33dmin. Do you want to pay attention to when the idle gear box gear meshing and sound normal, whether the individual bearing parts and motor properly. When press idle, the motor current should be around 3A. As the current is too high, they should immediately stop checks, adjustments and then boot.